this post was submitted on 20 Oct 2025
15 points (100.0% liked)

retrocomputing

5572 readers
10 users here now

Discussions on vintage and retrocomputing

founded 2 years ago
MODERATORS
SDF@lemmy.sdf.org
cognitivegears@lemmy.sdf.org
Penkster@lemmy.sdf.org
15
Help imaging a IDE drive (sh.itjust.works)
submitted 1 week ago by bridgeenjoyer@sh.itjust.works to c/retrocomputing@lemmy.sdf.org
20 comments fedilink hide all child comments
 

I am imaging this drive just in case it dies (from a 2000 gateway laptop I'm setting up for old games). it's a 2.5" IDE Toshiba drive. It works just fine, has Win 2k on it. I have tried 2 different IDE to usb adapters, and both have powered up the drive, but neither have shown anything in fdisk (on linux). No weird noises or bad clicking from the drive.

I do notice that the drive does not have any jumpers on it - so I didn't think I'd need to put a jumper on master (if it has that, i need to look closer) but I figured it would already have the jumper on master if it was the only drive in the laptop right?

you are viewing a single comment's thread
view the rest of the comments
[โ€“] Chronographs@lemmy.zip 2 points 1 week ago* (last edited 1 week ago) (1 children)

Could also try just a flash drive, I imagine whatever drive in there is pretty small. What ide adapters do you have anyways

[โ€“] bridgeenjoyer@sh.itjust.works 1 points 1 week ago

Maybe clonezilla would recognize it. Windows isn't recognizing usb devices at the moment.

I put the adapter in the main post.