this post was submitted on 08 Jan 2026
13 points (100.0% liked)

Linux

60958 readers
987 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 6 years ago
MODERATORS
 

I am trying to use a Thermaltake Blacx Duet (ST0015) HDD Docking Station with my Linux computers (Linux Mint and Ubuntu, all latest).

I have a SATA disk plugged in one of the bays and when I connect it to a USB port with its cable (everything is brand new) nothing happens.

lsusb returns:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 174c:2074 ASMedia Technology Inc. ASM1074 High-Speed hub Bus 001 Device 003: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 004: ID 046d:0ac4 Logitech, Inc. G535 Wireless Gaming Headset Bus 001 Device 005: ID 046d:c53a Logitech, Inc. PowerPlay Wireless Charging System Bus 001 Device 006: ID 046d:c547 Logitech, Inc. USB Receiver Bus 001 Device 007: ID 26ce:01a2 ASRock LED Controller Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 174c:3074 ASMedia Technology Inc. ASM1074 SuperSpeed hub

The only message in dmesgrelated to usb is:

[ 474.891877] usbcore: registered new interface driver usb-storage

which I understand means that the usb-storage module is loaded.

Same behavior in Ubuntu.

Does this mean that the hardware is just incompatible or is there anything more I can try?

you are viewing a single comment's thread
view the rest of the comments
[–] doodoo_wizard@lemmy.ml 3 points 5 days ago (1 children)

Do you have it plugged into the wall?

[–] biofaust@lemmy.world 1 points 5 days ago (1 children)

Yes, there is a Power LED and it is on.

[–] doodoo_wizard@lemmy.ml 2 points 5 days ago* (last edited 5 days ago)

The reason I asked that is 3.5” drives can’t operate from usb bus 5v like 2.5” ones can and you didnt specify.

Have you tried hot plugging the drive into the dock while it’s plugged into the computer? If the usb sata controller is slow on the uptake it might miss the relatively narrow chance to report to the pc what’s going on.

Don’t worry about damaging your drives doing that btw, it’s extremely unlikely that you have a disk whose firmware doesn’t support it and all sata ports support it electrically.

As an addendum: is the drive even good? Do you have a known functional disk to test with?

E: oh yeah, on the off chance that the disk is uninitialized get everything plugged up and do an lsblk to show the various block devices. Sometimes if I plug up a disk with no partition table or superblock or whatever gpt uses nothing happens but lsblk shows it and I can mess with it.