this post was submitted on 18 May 2026
1 points (100.0% liked)

Ask Electronics

4233 readers
4 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 3 years ago
MODERATORS
DavideAndrea@discuss.tchncs.de
linker3000@discuss.tchncs.de
1
Problem with switching a laser driver (europe.pub)
submitted 2 months ago by TDSOJohn@lemmy.world to c/askelectronics@discuss.tchncs.de
0 comments fedilink hide all child comments
 

Hello everyone, We have a problem with a circuit we built. The circuit seems to work properly with a green laser diode (130mA, lower voltage). With the red laser (higher voltage) on the other hand, the circuit delivers only 60mA max of the 130mA it should be giving the laser.

The problem seems to be the transistor's resistance because it works properly if we bypass the transitor and give +5V to the LM317.

Is it this assumption correct?

We tried a few transistors (BC241, BC236, TIP41C and TIP41) but with no luck. Is there a way to find a drop-in replacement for the transistor? MOSFET seem to have lower resistance but require an external driver with Arduino.

We need to use the Arduino PWM with these drivers, so at least 980hz switching frequency is needed.

Thanks in advance

Link to the schematics

no comments (yet)
sorted by: hot top controversial new old
there doesn't seem to be anything here