node815

This is anecdotal, only to say that the Linksys WRT-54G IMHO is/was a beast in the SOHO world. Back in 2013, I worked for the county replacing older equipment and it was time to upgrade the router in the fairgrounds lobby at the start of summer. Up we went to the rafters where it was and it was quite dusty in there, tons of pigeon feathers and miserably hot in the attic as most are. We pulled the router from service and replaced it with the new one already configured. The wrt54G was COVERED in dust, Pigeon droppings and feathers stuck to it. It ran forever that way I suspect. From what I was told, is was installed about 7 or 8 years prior, maybe longer.

To this day, I think Linksys must have partnered with Nokia's wizards for how sturdy that router was/is. You can still find them in our second hand stores and most people push DD-WRT on them. But since they are 10/100, they're not as popular anymore.

You could always use ntfy.sh if you are wanting to keep it light weight, I know there seems to be a heavy following and happy community with it. I personally use Gotify which has been nice and easy to use and just works for my needs. :) I looked at the shoutrrr repo and it seems to be either abandoned or just no longer updating maybe because their is no need to in the Dev's eyes. They also develop Watchtower which hasn't been touched in about 2 years ago. I have never had any issues with Watchtower so I think it may not need much maintenance. I do see though that they are working on a new project: https://github.com/containrrr/shepherd but it's also a bit stale.

To make it seamless so you can still Thunderbird, someone made a Docker image of it here: https://hub.docker.com/r/kebles/wanderbird But, you can probably find a newer release somewhere newer than 4 yrs old like this one. :) The point is, if you are wanting to keep it in the Thunderbird umbrella, then it's most likely been Dockerized.

I've Tried Cypht recently, but if you are using Gmail, it has a conflict there so it won't work out of the box without some extra work I think.

I can see them doing that, I use a DNS ad-block (Adguardhome) with plenty of filters and last night, I spotted that they were able to inject two ads (standard one to the right of the channels and one at the bottom below the menu for the new Minecraft movie when they changed my background. So, they are finding ways around this stuff. I simply disabled the Sponsored themes. We are on the fence about replacing the TV later this year but not 100% sure just yet. It's been quite buggy randomly rebooting when switching sources and other things.

Not related to the server, but I was very happily surprised with the latest Roku Jellyfin channel. A complete refresh of everything and it's great to see it.

Thanks for sharing this! I used it today to resize my Very large phone selfie I had to do for a profile image update at work and it did very nicely! Much faster for me to do that then load it in Gimp and scale it down since I was running late for work. : )

Hmmm... Interesting! I didn't realize there was a fork, but then again, this is one of those tools I've had running for several months close to a year or so and never thought about it. The original dev, Corentin, has been working on many more new projects: https://bsky.app/profile/corentin.tech .

I have several services. Home Assistant is not one as it's still a WIP for the person who's developing a solution. It works, but I'm sort of holding off until I can test it more with the mobile app.

https://github.com/christiaangoossens/hass-oidc-auth

But, to answer your question: I log into Tailscale with it. I also have it connected to Proxmox and Portainer Additionally, I have it connected to Pomerium so I can log into my FreshTomato Router with a fingerprint :) I also have a self hosted PasteBin connected to it.

I just tested my version of Firefox (Fresh from Play Store) and it worked without issues on my end to login to the server.

The only browser I'm aware of which doesn't support it is the Duck Duck Go Browser which is a shame. They don't seem to care about enabling WebAuthn support.

Pocket id is my go to. I used to use Authentik, but it was overkill for us. Pocket ID is pretty simple to use and has a very nice interface to add your users and clients. Uncluttered and straight and to the point. Pocket ID doesn't use UN/PW Combos. Instead, you use Passkeys as in webAuthn devices to log in, which IMHO is one of the better security paths.

https://github.com/pocket-id/pocket-id

I work from home, however my two systems (home and work) are on the same LAN, they don't see each other for file sharing. I get paid via direct deposit like everyone else which means my pay stubs are all electronic. I print those out and then use WinSCP to copy those over to my desktop. No other files are ever sent.

At home, depending on the amount of files, I either use SFTP via Filezilla, or if the mood strikes me and for a single file, I will just use SCP if I'm already on the cli which is most of the time it seems anymore doing work on my personal servers. I've found that SFTP is faster at transferring than doing a copy/paste to the NFS share to the same drive.

Maybe your own adblocker, I thought about doing that myself, I use the public one from adguard on my phone (dns.aguard-dns.com) but having it on your own device would be pretty slick perhaps. But thinking about it more, Google wouldn't just let you use an internal IP for the private DNS. I have tried it with my locally hosted adblocker and it rejects it.

Or you could set up a dashboard like Homepage or Dashy, or Flame or ? Ultimately, your imagination would do! :)