this post was submitted on 01 Jun 2025
26 points (96.4% liked)

homeassistant

14952 readers
6 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
26
Devices continuously dropping off my ZigBee network (lemm.ee)
submitted 3 weeks ago by MrKurtz@lemm.ee to c/homeassistant@lemmy.world
31 comments fedilink hide all child comments
 

I recently setup my ZigBee network in Home Assistant, using a Conbee III with deConz on my Synology NAS.

I purchased a few Aqara Temperature sensors and a couple of Mini Switches.

I was able to get them to pair just fine, but they won't remain online for more than a couple days. They then drop off and I can't even reconnect them easily. I need to try to pair them again like 10 times before they come back online.

At this point I don't know if the problem is my network, the Conbee III, deConz, or the Aqara devices.

I don't know much about ZigBee, but a couple things that I tried so far were:

  1. Use a USB extender instead of connecting the Conbee III directly to my NAS.
  2. Bring the devices as close a possible to the gateway. I don't have a big home, so I don't think distance is a factor here, but still, I put of the sensors right next to the gateway, and it would still drop after a while.

Do you have any hints on things to try to get this fixed, or at least identify the problem?

you are viewing a single comment's thread
view the rest of the comments
[–] mhzawadi@lemmy.horwood.cloud 1 points 3 weeks ago* (last edited 3 weeks ago) (1 children)

15 is right in the middle of both WiFi 1 and 6, maybe not the best channel for ZigBee.

Check out this page https://www.metageek.com/training/resources/zigbee-wifi-coexistence/

[–] MrKurtz@lemm.ee 1 points 3 weeks ago (1 children)

So... It should be good if I am using WiFi 11, shouldn't it? Not sure if I am missing something.

[–] mhzawadi@lemmy.horwood.cloud 1 points 3 weeks ago

Yeah, should be