3DPrinting

18926 readers

5 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

j4k3@lemmy.world

andypiper@lemmy.world

GrayBackgroundMusic@lemmy.zip

Destroyed my Glass Print Bed - What to do now (europe.pub)

submitted 3 days ago* (last edited 3 days ago) by Klajan@lemmy.zip to c/3dprinting@lemmy.world

31 comments fedilink hide all child comments

I was printing some ABS on my modified Anycubic I3 Mega overnight, when I awoke to this horror of a destroyed glass print bed...

Now the question remains, how to actually fix this? One part is still firmly attached to the Bed and I fear this may destroy the Bed even more.

And I obviously need a new Print bed, but I can't find the exact replacement, so should I even get a replacement Ultrabase? I saw that there are magnetic PEI beds available, but I am unsure if it is worth the 80-100€ for this.

Edit: Since the glass is glued to the 1.5mm aluminium heater PCB (and I already had to resolder the broken off wires once) I was looking at complete replacements at first, which why the price is relatively high

you are viewing a single comment's thread
view the rest of the comments

[–] CmdrShepard49@sh.itjust.works 2 points 2 days ago

I wouldn't add a new glass sheet + magnetic sheet + PEI sheet on top of the original bed on a bed slinger because this is probably at least twice the weight of stock, which will cause issues when you get it moving back and forth rapidly. Think of how agile a petite individual can be compared to someone the same height who weighs 300lbs.