Open Source

39440 readers

841 users here now

All about open source! Feel free to ask questions, and share news, and interesting stuff!

Useful Links

Rules

Posts must be relevant to the open source ideology
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon from opensource.org, but we are not affiliated with them.

founded 6 years ago

MODERATORS

Cloak@lemmy.ml

kevincox@lemmy.ml

CrypticCoffee@lemmy.ml

Lettuceeatlettuce@lemmy.ml

134

Anyone using a FOSS-friendly robot vacuum? (lemmy.ml)

submitted 1 week ago by Shatur@lemmy.ml to c/opensource@lemmy.ml

21 comments fedilink hide all child comments

I'm considering buying a robot vacuum cleaner, but I'm not a fan of the idea that it would scan my apartment and send data to the cloud.

I came across the Valetudo project, and it looks promising. It doesn’t replace the firmware - just replaces the cloud connection with local automation systems instead. Has anyone here used it? Or are you using something else for local control? I'd love to hear your experience 🙂

you are viewing a single comment's thread
view the rest of the comments

[–] isolatedscotch@discuss.tchncs.de 3 points 1 week ago

Damn, made me chuckle

Anyways, going by

, i have had multiple people (2, which is not a lot but it's weird it happened more then once) say that they couldnt solder just to discover that they were using their soldering iron wrong.

When you press the solder against the iron's tip, it should get wicked by the tip, and remain there until you press it on some wire/component leads.

If the solder beads up and slips away from the iron, or beads up and forms a blob at the end of the solder wire, it's oxidised and you probably need to get a new tip. It needs to be shiny and metallic.

The tip needs to be regularely cleaned while soldering by brushing it on a wet sponge, and never let the iron cool down without some solder on the tip to prevent oxidation.

also, FLUX FLUX FLUX