homeassistant

15533 readers

29 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Automating a window AC (lemmy.zip)

submitted 2 months ago* (last edited 2 months ago) by shortwavesurfer@lemmy.zip to c/homeassistant@lemmy.world

24 comments fedilink hide all child comments

So I have my AC connected to a smart plug and I'm trying to figure out what would be the best way to go about automating it.

Currently, I have it set to run every hour on the hour for 20 minutes if the time is between noon and 8 p.m. Which covers the hottest part of the day.

However, what I could do is have it run every other hour instead and have a couple of night runs along with the daytime runs.

Doing it that way would eliminate most of the 16-hour period currently that exists between the ending of one day and the beginning of the next.

Edit: Also, is there an easy way to automate every other hour using the time pattern or would I manually have to set up triggers for 2am, 4am, 6am, 8am, 10am, etc. using the fixed values?

Edit 2: looks like i can use "/2" to accomplish that

you are viewing a single comment's thread
view the rest of the comments

[–] Ebby@lemmy.ssba.com 1 points 2 months ago

A couple things to look out for is the amp rating of the plug. Not a lot do the full 15, and a high resistance startup load can be a PITA. Could burn relays or stress the compressor motor.

Also, those motors need cool down times after they stop. I'd build in a delay to any script just to be nice.

Good luck on your project though.