FleetingTit

No one answered so I will:

Have an enclosed printer! You won't be able to print anything larger than a couple of cm otherwise. Also make sure to not have air gaps, any cold air getting in can potentially lift up a corner.

You need a good first layer, even more so than with PLA. Have it squish a little more so that it sticks to the build plate like crazy.

Preheat your chamber passively with the bed. With my enclosed Ender 3 I did 10 minutes before large prints.

High bed temps: you might get away with 90°C at the lowest but 100°C is recommended.

When a print starts to lift off the build plate there's no fixing it. Either you're fine with the warp (and some squished layers/deformation) or you have to restart the print. No way to sugar-coat this.

Turn down part cooling as much as your overhangs allow, though with a hot enough chamber you might get away with "a lot" of cooling.

Print with brim or adhesion tabs! Mind the geometry of your part: models with tall walls will tend to warp more.

Tl;dr: printing ABS can be cruel, but it rewards you with strong, light parts that stay in shape even at high ambient temps like a car interior.

If you buy a Voron you need to be aware that everything the printer does it does because of YOU!

Any problems that arise will be due to misconfiguration, bad assembly, no proper tuning... But when you get it to print amazing results that is YOUR accomplishment.

Yeah, I absolutely agree!

The only thing that one has to give Bambulab credit for is making 3D printing accessible to people who don't want to or don't have the skills to tinker with their printer.

Türkischer oder asiatischer Supermarkt deines Vertrauens.

Das Wasser, welches ich trinke. Anstatt das in Plastik- oder Glasflaschen zu kaufen und wöchentlich in meine Wohnung zu schleppen, nutze ich ich einfach die Pipelines, die zu mir in die Wohnung gelegt wurden. Das spart Lagerfläche, Verpackung, und Energie für Transport und Recycling.

Außerdem schmeckt das bei uns besser als aus der Flasche.

And on any month of the year! Because queer people and our liberal way of life are not exclusively under threat in June.

Das war bislang ein NATO-Kreiswichs.

General limit yes, but make it 150 for now. It's easier to get people on board with a higher limit and lowering the limit will also encounter less resistance down the road (haha).

No, left is left and right is right. Duh!

Normalerweise sind Parkplätze nicht überdacht. Und wenn man erst Dächer/Ständer bauen muss dann ist das automatisch teurer als ohne.

The performance by the Israeli artist was boring af. But they weren't alone in that: this years ESC was just terrible. Only one participant was really fun to watch, 2 or 3 songs were actually good, but the rest was below mediocre.