Nick

joined 2 years ago
[–] Nick@mander.xyz 2 points 1 week ago

If you lose motivation because of the amount of time that you'd spend cooking, you should consider using days off to prep building blocks that can be used for different meals. Keeping the initial cook simple can give you a broad canvas to change things up on the spot so that you don't get fatigued over the flavor. You can salt a large chunk of meat like a pork shoulder or chuck roast and use a long cooking method like a braise or a roast. The longer cook times will make these cuts extremely tender, and you'll only have to do it once. Use them throughout the week in whatever application you feel like on the day, even if that means just adding it to your ramen. Since it's just salted, it's versatile enough to adapt to whatever seasonings or sauces you add to it. If you're using store bought ingredients, you can put together pasta, bbq sandwiches, or quesadillas pretty quickly.

As far as vegetables go, you can also prep individual portions of things like a mirepoix a week ahead of time, to cut down on the work you have to do every day. You could even freeze it in ice cube trays to make them last longer if you have the space. You can mince garlic ahead of time and store it in a neutral oil. If you don't mind acidity, pickling and lacto fermenting your vegetables is a good way to both preserve them and have something that's ready to go on demand. Some vegetables like broccoli can be parcooked without sacrificing texture to reduce the amount of time you have to spend cooking on the day of.

Meal kits may not have worked for you because they simplify the shopping, not the actual cooking process. It still takes the same amount of time to cook a meal kit, which doesn't exactly help when you're hungry and exhausted. I think that prepping pieces of a meal in advance will give you the tools to throw something together almost as quickly and easily as ramen, which might lead to you cooking more often. I hope this helps, and I'd be happy to expand on anything that was vague or otherwise lacking!

[–] Nick@mander.xyz 2 points 2 weeks ago (2 children)

If your coffee is tasting watery, you probably need to increase your brew ratio. For a drip coffee, you want to be in the range of 1:15-1:18 depending on the bean and personal preference.

If your issue is the body/texture of the coffees here, you might prefer a brew method that doesn't involve paper filters. Something like a moka pot or a french press would be a cheap way to dip your toes into this, and a moka pot brew with water added is probably the cheapest way to get something close to an Americano, which is what I assume you mean by black coffee.

Also, you're going to see people recommending that you buy specialty coffee from a local roaster, but I don't think that should be the first move you make if your goal is recreating your experience in Italy. American third wave coffee has a tendency towards highlighting origin characteristic and bright tones, which don't lend themselves toward getting the result I think you're looking for. If you want a roast-forward flavor profile, try using a mass-produced Italian supermarket brand like Illy or Lavazza.

Personally, I'm usually making a cortado with a bit of a longer ratio (1:2.5) to get more punchy fruit flavors out of my roasts. But if I'm evaluating a new bean/tweaking my roast, I'll also brew on a V60/Orea V4 so that I can get a bit more flavor separation and nuance. Also since it's summer, I'll sometimes do a Japanese iced coffee in the afternoons.

[–] Nick@mander.xyz 1 points 1 month ago

It seems like you're making the assumption that in saying it's disingenuous to make the claim, I'm casting some final moral judgment about the OP or their overall trustworthiness. Correct me if I'm wrong about that, you just seem to have taken issue with me potentially accidentally having called OP dishonest. To be clear, I was calling them dishonest (with regards to only the claim they made about their stainless steel pan being more nonstick than a nonstick pan, at least for the scope of my comment). It's just patently untrue that a stainless steel pan is more nonstick than a Teflon nonstick pan, no matter what you do to the stainless steel pan (except applying a nonstick coating). I don't have to make any unfounded assumptions about any mental state here. To make the claim requires that you are either innocently misinformed/uninformed or purposely making a misrepresentation about this particular issue.

And, for the record, I'm not assuming that the OP is malicious or intentionally set out to mislead people. It's exciting to achieve little to no sticking in a stainless steel pan and you want to share that achievement with others, hopefully to encourage them to achieve the same thing. All I did was correct some innocent exaggeration. And if it was malicious, well, at least I still used disingenuous correctly.

[–] Nick@mander.xyz 4 points 1 month ago

Usually, it's a robusta from Vietnam that's been brewed using a phin, the dripper featured in the original picture. It's often sweetened with a healthy dose of condensed milk to take some of the edge off of mass-produced and heavily roasted robusta.

[–] Nick@mander.xyz 12 points 1 month ago

Good luck finding an article on point for this sort of thing. I looked for a bit to try to find something to link here, but couldn't find anything that directly addressed cooking oil polymers. I just wanted to say that you won't necessarily be eating burnt fat. Seasoning cast iron/carbon steel isn't necessarily about burning fat onto the surface of the pan, since what you're trying to do is create a polymerized layer of cooking oil on the surface of the pan. Polymerization can occur well below the smoke point of an oil, you just apply heat to speed up the process. Applying too much heat can actually be counterproductive, since the polymer will carbonize, but you'll probably never reach this point unintentionally without leaving a pan on the burner unattended. Under normal cooking conditions, any heat degradation of the polymer layer will be made up for with the fresh cooking oil that you've used, refreshing the seasoning. If you're going to use cast iron or carbon steel, you should thoroughly clean any burnt on bits after cooking with dish soap. Modern dish soaps don't have lye, so you won't be doing any damage to the seasoning and you'll only be left with polymerized oil, not burnt fat.

If you do decide to do more research and find something on point, please do share! I wasn't able to find anything that explicitly pointed towards it being unhealthy, and I'm alright with making a somewhat informed assumption of the risk.

[–] Nick@mander.xyz 2 points 1 month ago (1 children)

Apologies to all the small omelette enjoyers out there! Depending on the texture you like on your omelettes/scrambled eggs, you may want to consider a small carbon steel pan as well. If you like your eggs softer or with small curds, it's going to be a much less finicky experience.

[–] Nick@mander.xyz 8 points 1 month ago (3 children)

Honestly, I'd recommend against buying a cookware set unless you think you'll really use every piece in the set or it's too good a price, because manufacturers tend to bundle in something that you probably won't get too much use out of or is a bit redundant (like an 8 inch fry pan).

As far as brands go, most of them are going to be pretty similar at the entry level price points, so I'd pick based on how comfortable/attractive the handles are and whether the rivers are flush or not. I wouldn't pay much attention to 3 vs. 5 ply when it comes to different brands, but instead to focus on the weight and thickness of the pan itself. Generally, a thicker pan will sear better than a thinner pan, but will also be less responsive to changes in temperature (these will probably be minor differences except with something extreme like a Demeyere Atlantis, so don't get too caught up on this).

If you're looking to put the pans in the dishwasher, you might want to splurge for a brand with sealed rims. This helps to prevent delamination of the layers, which can happen in the dishwasher (see All-Clad lawsuit). However, this process does add quite a bit to the cost, so if you don't plan on throwing them in the dishwasher regularly feel free to save money by getting unsealed rims. The cheapest brand that I'm aware of with sealed rims is Misen, but someone please chime in if you've seen a cheaper one.

[–] Nick@mander.xyz 2 points 2 months ago (1 children)

Unfortunately, scrambled eggs are one of those things that are a bit harder to cook in stainless. If you've been using oil, switching to butter can help with some of the sticking, but you might end up using more butter than you'd like and some heat management is still necessary. Honestly, a lot of people keep a single nonstick frying pan just for things like eggs, seared fish, or sauteed tofu, so don't feel pressured to make it work on stainless.

If you really feel compelled to move off Teflon completely, a carbon steel or cast iron pan will be much better suited to replacing nonstick for the instances where you're getting excessive sticking, at the cost of needing to avoid acids in the pan. But if I were you, I'd just keep using my Teflon pans until there's any flaking or chipping before making up my mind.

[–] Nick@mander.xyz 2 points 2 months ago* (last edited 2 months ago) (3 children)

First of all, congratulations on the baby! :) If you don't mind me asking, what sorts of dishes are you struggling to make on stainless steel?

I'm going to be presumptuous here and make a few suggestions, so feel free to push back if you've tried some of these things and they haven't worked or aren't as easy as I'm presenting. If you do still want to transition to stainless, it'll be easiest to start by only doing it bit by bit, rather than all at once. Dishes that naturally contain some acidic element (like tomatoes, citrus juice, vinegars, or wine) will be easiest to cook without a bunch of sticking. I'd recommend starting with a tomato-based pasta sauce. If, as it reduces, you notice bits sticking to the sides, it's easy enough to loosen up just by stirring a bit of the sauce onto it. Once you're more comfortable with this, you can try sauteing vegetables in the pan. Even with preheating, it'll might result in some stuck on bits, but adding a splash of lemon juice or champagne vinegar at the very end and agitating all of the ingredients should both brighten up the overall dish a bit as well as lift most (if not all) of those browned spots you saw. When it comes to searing meats, you might also have to adjust how often you're flipping. If it feels stuck when trying to flip it for the first and second time, waiting a bit longer will eventually lead to the meat releasing from the pan. After the initial release on both sides, it won't be anywhere near as sticky and you can flip as often as you're used to. I wouldn't worry about any browned spots either. While resting the meat, you can toss a bit of wine along with some stock in, turn up the heat, and stir continuously to loosen those bits up as well as flavor your pan sauce. Once it's reduced to about your desired consistency, you can throw a slice or two of cold butter in and stir for a relatively low effort but still tasty pan sauce. Plus, you make washing the pan much easier. I think this tends to be easier than trying to achieve a nonstick effect with stainless, and sort of demonstrates that there's ways to work around the issues some people have that aren't strictly heat management.

My cat really wanted to press the submit button halfway through and force me to edit it to complete the thought as quickly as possible. Sorry if it isn't quite helpful, and I'd be happy to follow up on any of it.

[–] Nick@mander.xyz 3 points 2 months ago

I'd posit that your well-loved cast iron looks even better than new. For me, moving off nonstick pans was about sustainability (and money waste, who wants to buy a 2 year subscription to cooking?), but I can't get over how beautiful some cookware gets just from being used. The patinas on cast iron/carbon steel pans reflect the dedication of their owners to a craft, which I'll take any day over a colorful pan whose surface flakes just from looking at it.

[–] Nick@mander.xyz 4 points 2 months ago (5 children)

You won't find any disagreement from me there. I just think that when you set the expectation too high (stainless steel can actually be more nonstick than Teflon), people will give up and just go back to nonstick pans when they can't achieve those results.

Regarding dishes that are solely the domain of Teflon, I think it definitely has a place for dishes that already have a high bar for execution. A perfect French omelette is hard enough on a nonstick that adding another layer of heat management puts it out of reach for most people. But like you said, there's not much that I'd use Teflon for, so I just don't have one after switching to induction.

[–] Nick@mander.xyz 64 points 2 months ago (24 children)

I think it's a bit disingenuous to say that any other cookware material outperforms Teflon nonstick, and actually harms the conversation when trying to convince people to switch to an alternative. Nothing is going to beat the nonstick performance a fresh nonstick pan, and that's perfectly fine. I don't need a pan so nonstick that I could start an egg in a cold pan with no oil. Well-meaning people run the risk of frustrating less experienced cooks when they assert that they'll get the exact same or better results from a stainless steel pan, which just isn't true, especially right from the start. Stainless has plenty of other benefits that make it more than worth the learning curve to use. Sometimes you want some stick, to build fond for a pan sauce. Or you need a pan that can go from stovetop to oven to finish cooking.

This post wasn't aimed at you specifically, I just wanted to vent at what I feel like has been an uptick in cookware bros flexing their ability to reduce sticking on stainless steel ("I'm so smart I name dropped this little-known thing called the Leidenfrost effect"). I quite like your video and post because they show an alternative way to reduce sticking on stainless that is definitely more forgiving for a beginner than trying to hit a specific temperature range.

view more: next ›