domi

I have been going back and forth on whether to buy this one. Looks like it is right up my alley but reviews seem to be all over the place.

Since it runs well on Deck I might just give it a try.

Valve told me to kick rocks (the unit is 18 months old/6 months out of warranty).

I assume you are from the US? The EU and some other places have 2 years of warranty.

Most modern OLED panels on TVs and monitors don't actually use classic PWM for dimming, they never turn off completely and instead fluctuate between like 100% and 95% brightness based on the refresh rate.

Did you ever test if you can see that as well at different refresh rates?

rtings always tests this under "Image Flicker". https://www.rtings.com/monitor/tests/motion/image-flicker

It's not considered flicker-free but the OLED panels listed with 0 Hz PWM frequency (most of them) should look fine.

However, there are two other elements that might cause issues:

• VRR flicker
• ABL dimming in HDR

Both can cause an unpleasant experience if you are sensitive to it.

Phones still commonly use PWM because it uses less energy. There are some that have a DC dimming option but it's rare.

It's amazing. With my black theme, a black background, and the mouse off the monitor, you can't even tell the thing is on.

I have a solid black color as background and a hidden task bar on my OLED monitor.

It's just a mouse cursor floating in nothingness.

Do you mean this article? https://thelibre.news/on-the-history-of-valve-and-linux/

The Redux upgrade is available for $20 or with an active Switch 2 Online Membership*.

*Additional charges may apply; dedicated servers not included

Weird.

You can set the paper profile twice, once by hitting Page setup in the Print preview and once after hitting print. Do you get different results when setting the profile to 4x6 and borderless twice? There's also scaling options in the Advanced tab in the printing dialog.

If that doesn't help you could ask the experts at https://github.com/OpenPrinting/cups/issues .

Make sure to read their reporting guidelines here: https://github.com/OpenPrinting/cups/blob/master/REPORTING_ISSUES.md

The application you print with should not affect the borderless printing unless the application itself adds a margin around the image. Gwenview has a print preview which shows how it thinks it will look.

Stupid questions first: After selecting a borderless print profile, did you set the margins all the way to 0?

Can you check if the print is cut off by ~3mm or if is just rescaled?

Das liegt aber nicht am Auto oder an den Bremsen sondern am Bremsverhalten. Mit dem Elektroauto werden die Bremsen kaum benötigt und rosten mit der Zeit.

Musste bei meinem Model 3 die Bremsen hinten nach 5 Jahren auch erneuern weil ich kaum bremse.

Maybe an e-book reader like KOReader? https://flathub.org/apps/rocks.koreader.KOReader

Plenty of them support local HTML.

I assume you tried adding a new printer through KDE? There's usually no driver needed if all you need to do is simply print/scan.

Does it fail with both options?

Which one, Bedrock or Java?

For Bedrock there is an unofficial launcher: https://flathub.org/apps/io.mrarm.mcpelauncher (Disclaimer: Never tried it)

For Java there is the offical launcher: https://flathub.org/apps/com.mojang.Minecraft

Alternatively, for Java, there are also the much better unofficial launchers like Prism: https://flathub.org/apps/org.prismlauncher.PrismLauncher