▲ 635 ▼ SpaceX Investors in Meltdown Over All the Money They’ve Lost (finance.yahoo.com) submitted 2 months ago by sanitation@lemmy.today to c/technology@lemmy.world 175 comments fedilink hide all child comments
[–] luthis@lemmy.nz 43 points 2 months ago (22 children) Fools and their money are easily parted. Seriously WTF did they expect???? permalink fedilink source hideshow 22 child comments replies: [–] sanitation@lemmy.today [S] 18 points 2 months ago (21 children) I think some people really bought into space datacenters, asteroid mining crazy talk. permalink fedilink source parent hideshow 21 child comments replies: [–] Frozengyro@lemmy.world 23 points 2 months ago (17 children) I had a family member talk about space data centers. I tried to explain how the issue in space is more about getting rid of heat, but they couldn't comprehend it cause space=cold. permalink fedilink source parent hideshow 17 child comments replies: [–] krashmo@lemmy.world 14 points 2 months ago (15 children) I would think dealing with radiaton would be the most difficult thing about massive amounts of electronics in space. That's why a chip on a satellite is much more expensive than an equivalent chip that stays on Earth. permalink fedilink source parent hideshow 15 child comments replies: [–] somethingsnappy@lemmy.world 16 points 2 months ago (14 children) Wait, we have to shield it AND get rid of heat?! permalink fedilink source parent hideshow 14 child comments replies: [–] orclev@lemmy.world 16 points 2 months ago (12 children) Don't forget power it as well. Watched a video where someone did the math and to generate the power required of a typical data center you'd need a solar array something like 40 times the size of the one on the ISS. It would be an absolute behemoth of a satellite and that's without taking into account the cooling which would likely double the size again. Of course once you get that big then you have to worry about keeping the thing in orbit because moving that much mass isn't exactly easy. No matter how you slice it it's a stupid ass idea that doesn't work. permalink fedilink source parent hideshow 12 child comments replies: [–] Womble@piefed.world 3 points 2 months ago (11 children) Power is pretty much the only part of space data centres that does make sense. You can put them in an orbit to get 24hr solar power and its stronger than on the ground as there's no atmosphere in the way. Large foldable solar panels are available, and unlike radiators you don't have to pump liquids through them. Other than hype (which is by far the major driving force behind companies talking about them) access to that power without regulation is the reason you would want to put them in space. permalink fedilink source parent hideshow 11 child comments replies: [–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent [–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent [–] bus_factor@lemmy.world 5 points 2 months ago Those two things aren't incompatible if you shield it with a massive heatsink. Still harder than just doing it on earth, though. permalink fedilink source parent [–] Tollana1234567@lemmy.today 6 points 2 months ago they were even talking about ocean datacenter a while ago, people dont comprehend how expensive you have to deal with oceanwater, granted it may dissipate heat faster. but dealing with corrosions, logistics would be expensive too. permalink fedilink source parent [–] saltesc@lemmy.world 11 points 2 months ago* It would be the most depressing job. You'd get bored so fast. Heeere am I floating 'round a DC Faaar above the world Replace a GPU Maybe have a wank or two permalink fedilink source parent [–] AbidanYre@lemmy.world 6 points 2 months ago LinkedIn is packed with Elon dick riding. permalink fedilink source parent [–] WhiskyTangoFoxtrot@lemmy.world 1 point 2 months ago Other people probably thought that the market would remain irrational for long enough for them to cash out. permalink fedilink source parent
[–] sanitation@lemmy.today [S] 18 points 2 months ago (21 children) I think some people really bought into space datacenters, asteroid mining crazy talk. permalink fedilink source parent hideshow 21 child comments replies: [–] Frozengyro@lemmy.world 23 points 2 months ago (17 children) I had a family member talk about space data centers. I tried to explain how the issue in space is more about getting rid of heat, but they couldn't comprehend it cause space=cold. permalink fedilink source parent hideshow 17 child comments replies: [–] krashmo@lemmy.world 14 points 2 months ago (15 children) I would think dealing with radiaton would be the most difficult thing about massive amounts of electronics in space. That's why a chip on a satellite is much more expensive than an equivalent chip that stays on Earth. permalink fedilink source parent hideshow 15 child comments replies: [–] somethingsnappy@lemmy.world 16 points 2 months ago (14 children) Wait, we have to shield it AND get rid of heat?! permalink fedilink source parent hideshow 14 child comments replies: [–] orclev@lemmy.world 16 points 2 months ago (12 children) Don't forget power it as well. Watched a video where someone did the math and to generate the power required of a typical data center you'd need a solar array something like 40 times the size of the one on the ISS. It would be an absolute behemoth of a satellite and that's without taking into account the cooling which would likely double the size again. Of course once you get that big then you have to worry about keeping the thing in orbit because moving that much mass isn't exactly easy. No matter how you slice it it's a stupid ass idea that doesn't work. permalink fedilink source parent hideshow 12 child comments replies: [–] Womble@piefed.world 3 points 2 months ago (11 children) Power is pretty much the only part of space data centres that does make sense. You can put them in an orbit to get 24hr solar power and its stronger than on the ground as there's no atmosphere in the way. Large foldable solar panels are available, and unlike radiators you don't have to pump liquids through them. Other than hype (which is by far the major driving force behind companies talking about them) access to that power without regulation is the reason you would want to put them in space. permalink fedilink source parent hideshow 11 child comments replies: [–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent [–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent [–] bus_factor@lemmy.world 5 points 2 months ago Those two things aren't incompatible if you shield it with a massive heatsink. Still harder than just doing it on earth, though. permalink fedilink source parent [–] Tollana1234567@lemmy.today 6 points 2 months ago they were even talking about ocean datacenter a while ago, people dont comprehend how expensive you have to deal with oceanwater, granted it may dissipate heat faster. but dealing with corrosions, logistics would be expensive too. permalink fedilink source parent [–] saltesc@lemmy.world 11 points 2 months ago* It would be the most depressing job. You'd get bored so fast. Heeere am I floating 'round a DC Faaar above the world Replace a GPU Maybe have a wank or two permalink fedilink source parent [–] AbidanYre@lemmy.world 6 points 2 months ago LinkedIn is packed with Elon dick riding. permalink fedilink source parent [–] WhiskyTangoFoxtrot@lemmy.world 1 point 2 months ago Other people probably thought that the market would remain irrational for long enough for them to cash out. permalink fedilink source parent
[–] Frozengyro@lemmy.world 23 points 2 months ago (17 children) I had a family member talk about space data centers. I tried to explain how the issue in space is more about getting rid of heat, but they couldn't comprehend it cause space=cold. permalink fedilink source parent hideshow 17 child comments replies: [–] krashmo@lemmy.world 14 points 2 months ago (15 children) I would think dealing with radiaton would be the most difficult thing about massive amounts of electronics in space. That's why a chip on a satellite is much more expensive than an equivalent chip that stays on Earth. permalink fedilink source parent hideshow 15 child comments replies: [–] somethingsnappy@lemmy.world 16 points 2 months ago (14 children) Wait, we have to shield it AND get rid of heat?! permalink fedilink source parent hideshow 14 child comments replies: [–] orclev@lemmy.world 16 points 2 months ago (12 children) Don't forget power it as well. Watched a video where someone did the math and to generate the power required of a typical data center you'd need a solar array something like 40 times the size of the one on the ISS. It would be an absolute behemoth of a satellite and that's without taking into account the cooling which would likely double the size again. Of course once you get that big then you have to worry about keeping the thing in orbit because moving that much mass isn't exactly easy. No matter how you slice it it's a stupid ass idea that doesn't work. permalink fedilink source parent hideshow 12 child comments replies: [–] Womble@piefed.world 3 points 2 months ago (11 children) Power is pretty much the only part of space data centres that does make sense. You can put them in an orbit to get 24hr solar power and its stronger than on the ground as there's no atmosphere in the way. Large foldable solar panels are available, and unlike radiators you don't have to pump liquids through them. Other than hype (which is by far the major driving force behind companies talking about them) access to that power without regulation is the reason you would want to put them in space. permalink fedilink source parent hideshow 11 child comments replies: [–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent [–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent [–] bus_factor@lemmy.world 5 points 2 months ago Those two things aren't incompatible if you shield it with a massive heatsink. Still harder than just doing it on earth, though. permalink fedilink source parent [–] Tollana1234567@lemmy.today 6 points 2 months ago they were even talking about ocean datacenter a while ago, people dont comprehend how expensive you have to deal with oceanwater, granted it may dissipate heat faster. but dealing with corrosions, logistics would be expensive too. permalink fedilink source parent
[–] krashmo@lemmy.world 14 points 2 months ago (15 children) I would think dealing with radiaton would be the most difficult thing about massive amounts of electronics in space. That's why a chip on a satellite is much more expensive than an equivalent chip that stays on Earth. permalink fedilink source parent hideshow 15 child comments replies: [–] somethingsnappy@lemmy.world 16 points 2 months ago (14 children) Wait, we have to shield it AND get rid of heat?! permalink fedilink source parent hideshow 14 child comments replies: [–] orclev@lemmy.world 16 points 2 months ago (12 children) Don't forget power it as well. Watched a video where someone did the math and to generate the power required of a typical data center you'd need a solar array something like 40 times the size of the one on the ISS. It would be an absolute behemoth of a satellite and that's without taking into account the cooling which would likely double the size again. Of course once you get that big then you have to worry about keeping the thing in orbit because moving that much mass isn't exactly easy. No matter how you slice it it's a stupid ass idea that doesn't work. permalink fedilink source parent hideshow 12 child comments replies: [–] Womble@piefed.world 3 points 2 months ago (11 children) Power is pretty much the only part of space data centres that does make sense. You can put them in an orbit to get 24hr solar power and its stronger than on the ground as there's no atmosphere in the way. Large foldable solar panels are available, and unlike radiators you don't have to pump liquids through them. Other than hype (which is by far the major driving force behind companies talking about them) access to that power without regulation is the reason you would want to put them in space. permalink fedilink source parent hideshow 11 child comments replies: [–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent [–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent [–] bus_factor@lemmy.world 5 points 2 months ago Those two things aren't incompatible if you shield it with a massive heatsink. Still harder than just doing it on earth, though. permalink fedilink source parent
[–] somethingsnappy@lemmy.world 16 points 2 months ago (14 children) Wait, we have to shield it AND get rid of heat?! permalink fedilink source parent hideshow 14 child comments replies: [–] orclev@lemmy.world 16 points 2 months ago (12 children) Don't forget power it as well. Watched a video where someone did the math and to generate the power required of a typical data center you'd need a solar array something like 40 times the size of the one on the ISS. It would be an absolute behemoth of a satellite and that's without taking into account the cooling which would likely double the size again. Of course once you get that big then you have to worry about keeping the thing in orbit because moving that much mass isn't exactly easy. No matter how you slice it it's a stupid ass idea that doesn't work. permalink fedilink source parent hideshow 12 child comments replies: [–] Womble@piefed.world 3 points 2 months ago (11 children) Power is pretty much the only part of space data centres that does make sense. You can put them in an orbit to get 24hr solar power and its stronger than on the ground as there's no atmosphere in the way. Large foldable solar panels are available, and unlike radiators you don't have to pump liquids through them. Other than hype (which is by far the major driving force behind companies talking about them) access to that power without regulation is the reason you would want to put them in space. permalink fedilink source parent hideshow 11 child comments replies: [–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent [–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent [–] bus_factor@lemmy.world 5 points 2 months ago Those two things aren't incompatible if you shield it with a massive heatsink. Still harder than just doing it on earth, though. permalink fedilink source parent
[–] orclev@lemmy.world 16 points 2 months ago (12 children) Don't forget power it as well. Watched a video where someone did the math and to generate the power required of a typical data center you'd need a solar array something like 40 times the size of the one on the ISS. It would be an absolute behemoth of a satellite and that's without taking into account the cooling which would likely double the size again. Of course once you get that big then you have to worry about keeping the thing in orbit because moving that much mass isn't exactly easy. No matter how you slice it it's a stupid ass idea that doesn't work. permalink fedilink source parent hideshow 12 child comments replies: [–] Womble@piefed.world 3 points 2 months ago (11 children) Power is pretty much the only part of space data centres that does make sense. You can put them in an orbit to get 24hr solar power and its stronger than on the ground as there's no atmosphere in the way. Large foldable solar panels are available, and unlike radiators you don't have to pump liquids through them. Other than hype (which is by far the major driving force behind companies talking about them) access to that power without regulation is the reason you would want to put them in space. permalink fedilink source parent hideshow 11 child comments replies: [–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent [–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent
[–] Womble@piefed.world 3 points 2 months ago (11 children) Power is pretty much the only part of space data centres that does make sense. You can put them in an orbit to get 24hr solar power and its stronger than on the ground as there's no atmosphere in the way. Large foldable solar panels are available, and unlike radiators you don't have to pump liquids through them. Other than hype (which is by far the major driving force behind companies talking about them) access to that power without regulation is the reason you would want to put them in space. permalink fedilink source parent hideshow 11 child comments replies: [–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent [–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent
[–] ByteJunk@lemmy.world 3 points 2 months ago (8 children) This makes sense to me. Also, with all that surface area on panels, I feel like there's a way of having them double as heat radiators - one side captures energy, the other radiates it out... permalink fedilink source parent hideshow 8 child comments replies: [–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] anomnom@sh.itjust.works 3 points 2 months ago (7 children) The solar panels have to be kept cool too though, moving electrons through the panels is generating heat before it even gets to a processor and without air, cooling them will require radiators of their own. permalink fedilink source parent hideshow 7 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] ByteJunk@lemmy.world 1 point 2 months ago* (6 children) Oh. Good point. Unrelated, but anyone deep enough in the comments to read this, you might consider checking out the game Stationeers - a brutally complex base/space station/colony building game that will eat years of your life if you let it, stay away. Huge fun. permalink fedilink source parent hideshow 6 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] anomnom@sh.itjust.works 2 points 2 months ago (5 children) It’s suggestions like these that make me glad I don’t have a gaming rig. permalink fedilink source parent hideshow 5 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] ByteJunk@lemmy.world 1 point 2 months ago (4 children) Could you live without learning a made-up assembly-like programing language just so you can have your solar panels track the sun, only to find out you know very little about "azimuth" and "elevation" and now your potatoes aren't growing because you can't power that grow light. I mean, you could, but are you even living at that point? Did you mention how fun it is to find out you got your gaseous fuel stoichiometry wrong? It's a blast. permalink fedilink source parent hideshow 4 child comments replies: [–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] anomnom@sh.itjust.works 1 point 2 months ago (3 children) I’ve actually done both those things in real life believe it or not. But for the solar tracking I went lazy and used a pair of photoresistors and some canned PID code with a little tuning for my motor. And I fix lawnmowers for most of my neighborhood. permalink fedilink source parent hideshow 3 child comments replies: [–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] ByteJunk@lemmy.world 1 point 2 months ago (2 children) You're doing it wrong brother, if you're doing it IRL that's work, good riddance... But for real, that's really cool! You hooked up a motor and photo resistors to a controller you've programmed? Bonkers. Do you have any write up about it? super curious about how you did it. permalink fedilink source parent hideshow 2 child comments replies: [–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] anomnom@sh.itjust.works 2 points 2 months ago (1 child) I used to teach tech making to students in a program and we did all kinds of little projects with microcontrollers and basic electronics, but also laser cutters and early 3D printing (pre makerbot). Almost 20 years ago now, so most of the documentation is lost to time. Arduinos are fun to play with though, there’s lots of examples and libraries out there, and the clone market means you can get them in 5 packs for only a few dollars. Motor controller boards, all kinds of sensor breakouts and tiny servos are also cheap as chips these days. You could spend the rest of your free time on that too! permalink fedilink source parent hideshow 1 child comment replies: [–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] ByteJunk@lemmy.world 2 points 2 months ago Never messed with arduinos specifically, but I've built a few projects throught the years with ESPs, those things are dirt cheap and very fun to work with! Nothing with motors though - mostly attaching them to sensors and batteries to collect data, or control lighting (LED/RGB strips, etc). There's just *way * too many interesting things in the world, and so little free time! It's a tragedy really... :) Hope you can find the time and life conditions to embrace the projects you love. Have a great day! permalink fedilink source parent
[–] orclev@lemmy.world 2 points 2 months ago (1 child) It still doesn't make sense because of the power density. The size of the solar array you would need is completely impractical. Even a "large foldable solar panel" isn't going to cut it. Most satellites are relatively low power and even then the size of the solar arrays they have relative to the volume of the satellite is massive. Something as energy hungry as a data center pretty much demands a "small" nuclear generator to power it and the practicality of getting that into orbit nevermind the issues when it eventually de-orbits makes that a nonstarter. permalink fedilink source parent hideshow 1 child comment replies: [–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent
[–] Womble@piefed.world 2 points 2 months ago* Starlink sats are of the order of 20-50kW, an AI focused rack in a data centre is on the order of 100kW, powering the things is definitely feasible. Unlike: cooling them rad hardening them replacing components as they fail data up/downlink or interconnect All of which are somewhere between horrible and impossible for data centres in space. permalink fedilink source parent
[–] bus_factor@lemmy.world 5 points 2 months ago Those two things aren't incompatible if you shield it with a massive heatsink. Still harder than just doing it on earth, though. permalink fedilink source parent
[–] Tollana1234567@lemmy.today 6 points 2 months ago they were even talking about ocean datacenter a while ago, people dont comprehend how expensive you have to deal with oceanwater, granted it may dissipate heat faster. but dealing with corrosions, logistics would be expensive too. permalink fedilink source parent
[–] saltesc@lemmy.world 11 points 2 months ago* It would be the most depressing job. You'd get bored so fast. Heeere am I floating 'round a DC Faaar above the world Replace a GPU Maybe have a wank or two permalink fedilink source parent
[–] AbidanYre@lemmy.world 6 points 2 months ago LinkedIn is packed with Elon dick riding. permalink fedilink source parent
[–] WhiskyTangoFoxtrot@lemmy.world 1 point 2 months ago Other people probably thought that the market would remain irrational for long enough for them to cash out. permalink fedilink source parent