you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 2 weeks ago (5 children)

I completely fixed my neighborhood of 800 homes. took me a week. I drew in the house shapes and the heights, turned the row home blocks into individual linked blocks with exact addresses and accurate sidewalks.

  • source
  • parent
  • hideshow 5 child comments
  • [–] 1 point 2 weeks ago (4 children)

    I've never added in height before. Does it just look for number of stories, or how did you find that info?

  • source
  • parent
  • hideshow 4 child comments
  • [–] 1 point 2 weeks ago (3 children)

    When you make an area->structure in osm, you can add it in the height meta in meters.

    When an app uses the OSM data to draw a 3d structure, it can use your height data. (and most appear to)

  • source
  • parent
  • hideshow 3 child comments
  • [–] 1 point 2 weeks ago (2 children)

    I meant more how did you find the height of the structures? Is it listed in a property database somewhere or are all the houses roughly the size of yours so you just used that as a base?

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 2 weeks ago (1 child)

    I live in a neighborhood with 3 house styles; each has a fixed number of floors. The townhomes all have 8' ceilings, a basement, 1st, a second floor, and an attic or loft. All basements are walkout so i count them. I-joists are about 18 inches. So the townhomes are ~ 11 meters.

    The single family are basement, 1st, and second, with 10" main floor and 8" second floor, then they have 16' attics, which puts them ~ 13m

    The apartment complex has 5 fixed floors. It was trickier because I don't know the internal structure, nor the height of the decorative crowns, so I took a Google Earth look at the side of the building, drew a 45-degree line down from the top, and measured the bottom of the triangle

  • source
  • parent
  • hideshow 1 child comment