Right to Repair

Fair enough.

This is honestly just a bit of a rant as my Dyson V10 has broken again…. This is what has broken in the last year:

• trigger guard snapped
• battery died
• head pivot broken
• empty-mechanism snapped
• filter showing clogged after cleaning, needed a new filter.

Every replacement is exorbitantly expensive, and requires as complicated replacement procedure as possible. A battery that consists of seven 18650 cells which should cost ~£20 to replace is £90! You can’t replace the cells as the unit is plastic welded together.

You know what isn’t broken and has never broken; my 40 year old Sebo which is now been promoted from ‘upstairs vacuum’ to ‘primary vacuum’

cross-posted from: https://europe.pub/post/1876015

cross-posted from: https://programming.dev/post/32848147

While iFixit's iOpener is a good tool and it was what I used replace the screen on my Pixel 7 Pro but I think a heat plate is a better option for any future project. I have two older phones that I want to fix up but this time I want to do things a little more 'professional.' There's a heat plate that Hugh Jeffreys uses (example here) but I haven't been able to find that exact one or even a similar product. During my search for a heat plate, I saw recommendations for a heat mat called CPB. While it looks like a good tool, it gives off the impression of a hobbyist project rather than a professional job. I will consider, though, if I can't find any good heat plates. Any recommendations? Thanks in advance.

Army joins in push to break vendor grip on military maintenance

Hi there,

I have been recently busy with a xps 15 9500 and the trackpad. For a while, this laptop suffered from erractic behavior that nothing could explain why the behavior. Recently I decided to get a trackpad via eBay.

Installed it, felt actually better than the previous, it looked OK. 10 minutes later, trackpad is recessed and it is in a mode like left click is constantly clicked. I've tried everything under the sun (electric tape on the back, loosen or tighten screws around the battery, apply electricat tape on the wedge where the 2 prongs of the trackpad rest inside the battery, etc). And absolutely nothing works.

At this point I am losing my marbles and just want to throw this bs into the bin. Which is a massive waste, since the machine is still in great condition. But a laptop without a functional trackpad is not a laptop.

Did anyone around here ever had a xps 9500 and managed to solve this issue?

EDIT: I forgot to mention a very important detail. When I am using the laptop and if I put the screen on the desk (meaning, main part of the laptop is now vertical), the trackpad works no problem (left side still feels recessed, but at least clicks normally)

Sounds like there are a lot of exemptions which is disappointing

Thanks in part to your support, the right to repair is now law in Washington.

It’s not drift alone.

I previously posted:

Liberating manuals from the many jails of manuals into InternetArchive

It turns out if you create an archive.org account, they might delete it. Not sure why my acct no longer works. It’s a bit off that we must go through registration hoops in the first place in order to /contribute/ to the archive.

Anyway, I went to the effort of unbinding and scanning a manual that does not exist in the cloud. Where is a good place to upload it? I am certaintly not going to feed a manual jail of any kind. Has to be effort-free for both contributors and users.

cross-posted from: https://slrpnk.net/post/20555307

Thought I should share this here as I found this pretty neat and handy!

Really interesting article on how old hardware is being rebuilt in Delhi