submitted 4 days ago* (last edited 4 days ago) by to c/memes@lemmy.world
 

Apparently pre-rinsing confuses the dishwasher or something. Not doing it leaves me with residue all over the other dishes though 🀷

Star wars Anakin and Padme meme, with a dishwasher poorly GIMPed onto Anakin's face. Dishwasher Anakin: Save water, no need to rinse your dishes first. Padme: And they will come out clean, right? Anakin dishwasher: ... Padme: And they will come out clean, right?
you are viewing a single comment's thread
view the rest of the comments
[–] 23 points 3 days ago (18 children)

Running your faucet only makes sense if your dishwasher is also hooked up to warm water. (In Germany) I've only seen them connected to cold water.

  • source
  • parent
  • hideshow 18 child comments
  • [–] 11 points 3 days ago (3 children)

    It's an American thing. Our dishwashers get hot water from the line, there is a heating element, but it is not very powerful due to our lower output electrical sockets.

    I've heard other countries have washers that are powerful enough to heat their own water, which is why they are attached to the cold water supply.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 4 points 3 days ago* (2 children)

    Do your dishwashers not have different temperature programs? Tap water is generally set at 65ΒΊC here. My dishwasher has a 45ΒΊC program, a 50ΒΊC program, etc. Depending on how dirty your dishes are you can use lower-temp program to save energy. They even make dishwasher pods specifically for lower temperatures. If it always takes in hot water it would need a way to cool it down.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 3 days ago (1 child)

    Not for washing. Usually there will be settings like quick wash, normal, heavy and "pots and pans". There is a high temp and low temp option, but that is for drying the dishes.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 1 point 2 days ago

    It's not like you need to follow commercial requirements like DIN EN 17735, but that feels so weird to depend so much on the faucets temperature. I can just click a button and get a 70c+ wash or whatever, I wouldn't get that high from my faucet...

  • source
  • parent
  • [–] 2 points 3 days ago (1 child)

    Interesting. Why? Do the dishwashers there require only using cold?

    In the US, it is always meant to be connected to the hot tap. The first rinse cycle doesn't heat the water (or doesn't run long enough for the heater to make it hot, anyway). It depends on the hot water from the line to be maximally effective that first rinse. And once drained and refilled for the wash, the water will get up to temp eventually, but it's more effective if it starts hotter.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 0 points 3 days ago (11 children)

    Of all the things. Like what the fuck Germany.

  • source
  • parent
  • hideshow 11 child comments
  • [–] 27 points 3 days ago* (last edited 3 days ago) (9 children)

    We have 230VAC (on all outlets) instead of your guys' puny 120V, so our dishwashers aren't handicapped out of the box and can heat their own water properly. I feel like having to run the tap before doing dishes is an L for the US, not Germany/Europe?

  • source
  • parent
  • hideshow 9 child comments
  • [–] 16 points 3 days ago (5 children)

    For a country that's all about doing things big, they sure whimped out on their electrical system

  • source
  • parent
  • hideshow 5 child comments
  • [–] 3 points 3 days ago (4 children)

    In our defense we were very early to having one and everyone was afraid of electricity at the time

  • source
  • parent
  • hideshow 4 child comments
  • [–] 3 points 3 days ago (3 children)

    I was gonna say in our defence most of us can't be trusted with high voltage

  • source
  • parent
  • hideshow 3 child comments
  • [–] 1 point 3 days ago (2 children)

    Electricity in the usa is not weaker than Europe. Since the voltage is half as high, it just takes double the current to do the same work. A heater running 220v at 5 amps and a heater running 110v 10 amps will work exactly the same.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 1 point 3 days ago (2 children)

    Wat? We have 230v also. We have both 120v and 220/240.

  • source
  • parent
  • hideshow 2 child comments
  • [–] 3 points 3 days ago

    A lot of houses are older than the concept of central heating or running warm water, so there are some homes that don't have central warm water, but instead small heaters under the kitchen sink/next to the bathroom, which might or might not hook up to dishwashers

  • source
  • parent