838
Microsoft confirms Windows 11 is about to change massively, gets enormous backlash - Neowin (www.neowin.net)
submitted 11 months ago by to c/technology@lemmy.world
300 comments fedilink hide all child comments
 

A few days ago, Davuluri shared his excitement about it on his official X handle. He seemed very eager to reveal what the company has in mind at the upcoming Ignite event regarding the agentic OS plans.

Unfortunately for Microsoft and Davuluri, the response has been overwhelmingly negative, so much so that the comments on that X post have now been disabled.

Made me laugh. :)

you are viewing a single comment's thread
view the rest of the comments
[–] 17 points 11 months ago (9 children)

Corporate suicide is so fun to watch when you're not stuck using their products.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 9 child comments
    •
  • [–] 9 points 11 months ago (8 children)

    Indeed...

    My Linux story started 15 years ago. I'm a tech guy (systems admin at the time) and reached the "I work with computers all day, don't need more of that at home" stage (which was insane to think of a few years before)... tried Linux, loved it and still today my house is a junk yard of old computers having their best second life.

    EXACTLY parallel to cutting my cable, my experience ditching MS (which I still have to use about 20% at work) has been one where I felt it was needed but hesitant I would miss out, but in all this time, the more I check MS (or cable TV) the more I realize I am missing NOTHING and my life is better for distancing myself from it

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 8 child comments
    •
  • [–] 3 points 11 months ago (7 children)

    Re: missing out

    I've got friends who tell me they won't switch to Linux because they want their anti-cheat games. I usually tell them if they took the time to learn their system they'd understand why they don't want anto-cheat games.

    In the last 20 years, I have not found a single piece of software (games excluded, i pay for art when payment is asked) that I, a regular person on the internet, have not been able to source a free open source alternative that while potentially equipped with a steep learning curve is often as good as if not Better than many corporate solutions once learned.

    People can pay for pretty, super convenient UIs and proprietary solutions with support contracts if they want to, thats their perogative. I prefer to learn the software myself and if I hate the UI that much that I'd be willing to pay, its worth either just sitting down and making my own with pyside (its quick and easy, learning curve excluded) or paying a freelance dev to make one bespoke.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 7 child comments
    •
  • [–] 6 points 11 months ago

    110%

    When Covid hit, I decided I finally had enough time to invest in a gaming PC. My son and I put one together and, thinking I would miss out on many games, we set it up to dual boot. 3 months later we both realized we wanted nothing that "only ran on Windows" so we recovered the wasted space and it became a Linux only machine (like the rest in my house)

    I can also confirm my experience has been the same re any other application or piece of software. My current daily driver is basically against all recommendations for a daily driver: running Garuda Dragonized with a side of Hyprland, even the Garuda folks do not recommend this mix but I fell in love with Hyprland and my son still prefers KDE. I had to learn a lot to configure everything in Hyprland from scratch (first tried it with someone's config but decided I wanted my own). Took a bit of learning but it was so much fun and in the last 5 months since I implemented this crazy soup, I have had no freezes, no hangs, no apps dying on me, nothing... everything is fast, solid and more importantly, I know and control every aspect of the experience...

  • permalink
  • fedilink
  • source
  • parent
  • [–] 3 points 11 months ago (5 children)

    Can u run fusion 360? We use this software at work for 3d printer and plasma table. Have not been able to find anything that could run both on linux yet.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 5 child comments
    •
  • [–] 3 points 11 months ago (1 child)

    I've seen some people say they got fusion 360 working on linux with bottles, but I didn't have any luck with it. I use OpenSCAD and FreeCAD for making models to print, but if you need Fusion360 specifically for work (or specific Adobe products) then you are kind of stuck unless your company is ok with a change. You won't be able to view or edit other people's Fusion360 files without that specific application. You can always run Windows in a VM on linux and install only the applications you need it for there. If you have a good enough PC that is viable, but isn't a great experience on a lower end system.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 1 point 11 months ago

    I have not used open scad or freecad! The thing about fusion that works so well for us at work is we can design prototypes and 3d print them out of plastic, and if the test fit goes well we can then move it over to our plasma machine and cut the parts from sheet stock then weld together to make our component. We also do some more component design (think central inflation systems though wheel hubs) but the more advanced stuff the boss handles. For us to adopt at work I think it would have to have compatibility with fusion 360 as that's what my boss uses primarily and we have dozens maybe hundreds of design files to cut brackets for engine swaps gas tank mounts control arm brackets you name it. Suppose it's probably a bit late for us to make any move to Linux, especially considering we just got a 4 axis cnc mill and I don't think any Linux software will play with that

  • permalink
  • fedilink
  • source
  • parent
  • [–] 2 points 11 months ago (2 children)

    Use two tools if one doesn't get the job done, is kind of my point here. Sure you can pay for the convenience of f360, or you can build your own toolkit. Its like 2-in-1 shampoo, if it does both things it probably isn't the best at either of them.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 11 months ago (1 child)

    So rather than use a ready made software that works perfect for designing parts you suggest I build my own software? That is simply not a feasible solution, ESPECIALLY in a business environment lol. Your 2 in one shampoo comparison is kind of irrelevant, this is more akin to suggesting that instead of purchasing a car I design one from scratch! That doesn't help adoption of Linux in the least, it is in fact the burden that keeps more windows users from adopting.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 3 points 11 months ago

    Bud if its not feasible for you don't do it then.

    As I stated in my original comment, some people use readymade suites and pay for support, that is their perogative.

    I find I do Better quality work when I build my own toolkit, and tie the tools together my way.

    To borrow an example from my father in reference to working on cars:

    Sure you can buy a mechanic's toolbox that will have everything you need but those are cheap, mass produced tools desogned to fit the needs of the everyman. If you buy an empty toolbox instead you can fill it with the tools you use, then you can have higher quality tools for the things you actually do with them and not waste space on tools you don't ever touch.

  • permalink
  • fedilink
  • source
  • parent