689
A $150 Buttonless, Open Hardware Answer to Kindle is being crowdfunded by Open Book Touch (itsfoss.com)
submitted 3 months ago by to c/technology@lemmy.world
134 comments fedilink hide all child comments
 

cross-posted from: https://lemmy.world/post/49429587

URL for the crowdfunding: https://www.crowdsupply.com/oddly-specific-objects/open-book-touch

Specs:

  • Display: 4.26" e-paper touchscreen, 480 × 800 px, warm + cool frontlight
  • Processor: ESP32-S3 dual-core, Wi-Fi + Bluetooth LE
  • Memory: 16 MB flash, 8 MB PSRAM
  • Formats: EPUB and plain text, no DRM
  • Storage: microSD card slot
  • Interface: USB-C with integrated LiPo charging
  • Dimension: 78 × 120 × 10 mm, about 85 g
  • Open source: MIT-licensed firmware, open hardware (to be released at shipping)

It also has a replaceable 800 mAh battery, I found it cool :)

you are viewing a single comment's thread
view the rest of the comments
[–] 22 points 3 months ago (16 children)

I actually just got one of these things (https://www.xteink.com/products/xteink-x4) that has a 4" screen (WITH BUTTONS) for $55 on Amazon and I kinda love it. I think my perfect phone would be something this size with GrapheneOS support and a headphone jack.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 16 child comments
    •
  • [–] 4 points 3 months ago (5 children)

    got an x3 this week. love that i can keep it in my little shirt pocket, etc. reading more already vs scrolling. buttons for the win, really. the bezel left right and top are, imho, perfect.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 5 child comments
    •
  • [–] 2 points 3 months ago (4 children)

    The x3 is actually slightly newer too, but I was already wary of the 4" size so I went for the x4. It ended up being just fine though.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 1 point 3 months ago (3 children)

    yeah. my x3 seems to fit fine in my notebook holder next to my 3x5 craft paper notebooks. or shirt pocket. i might change to x4 once they start shipping again but i have already read a bunch on the 3 … its size may work out fine. i daily carry an iphone 15 the small one.. and i think thats similar in size to the x4?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 3 child comments
    •
  • [–] 1 point 3 months ago (2 children)

    The x4 is smaller than any semi-recent smartphone I am familiar with, but maybe. The x4 is smaller than a 3x5 card, so this has me doubting that the x3 is truly smaller.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 2 points 3 months ago (2 children)

    Read so much about that thing. Make it 100$, give it a backlight and WiFi and I'll buy three...

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 2 points 3 months ago (2 children)

    Security on android ereaders is definitely disappointing. My Boox palma 2 only supports pins, not passwords. And unfortunately I don't think a pure eink would work for me. The xteink has me curious if you could make firmware to "leech" off grapheneOS' security by doing something like an SMB share to avoid having potentially pirated books unencrypted.

    What I'd personally love to see is an X4 sized device with NFC, wireless charging, and Lora for meshtastic.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 8 points 3 months ago (1 child)

    The x4 doesn't run Android at all, so I don't think GrapheneOS is even remotely on the table. The open source firmware I use on my (https://crosspointreader.com/) does support using Calbre over wifi though.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •