160F = 71C for the freedom challenged among us.
Seems crazy hot to open up for traffic tho.
this post was submitted on 06 May 2026
415 points (98.8% liked)
Mildly Interesting
26658 readers
72 users here now
This is for strictly mildly interesting material. If it's too interesting, it doesn't belong. If it's not interesting, it doesn't belong.
This is obviously an objective criteria, so the mods are always right. Or maybe mildly right? Ahh.. what do we know?
Just post some stuff and don't spam.
founded 3 years ago
MODERATORS
They can’t walk
As a kid I burned the bottom of my foot (enough to cause blistering) on fresh blacktop in Palm Springs. They had just opened the repaved parking lot in the full SoCal summer heat when we pulled in to go to the bank. I took 2 steps: the first adhered my flip-flip firmly to the asphalt and the second took my foot out of said flip-flop and landed it right on crazy hot and sticky surface.
Even though this article says that tire rubber starts to break down and melt between 100⁰C to 150⁰C, depending on the rubber compound, I'd still prefer to protect my tires from such high temperatures..
https://thetirereviews.com/is-it-true-tires-can-melt-because-of-heat/
Edit: Those temperatures are also rather dangerous for electric vehicle batteries, which are located right under the vehicle in very close proximity to the road heat.
Unless you have a Nissan Leaf or an UpMiiGo your battery has some sort of active cooling.
load more comments
(16 replies)
Geez I hope they put up no pet signs. Would hate for someone to let their dog walk on this.
Since summer is coming in many parts of the world, I'll include a psa about asphalt temps being well above air temps. Good chance if you are enough of a nerd to be on Lemmy you have a laser thermo probe somewhere. Consider bringing on your walk and checking some pavement temps. Avoid walking dog if >115f 46C
I just touch the pavement with my hands every time the road surface changes. If I can't hold it there comfortably for a few seconds my dog is not going on it.
load more comments
(3 replies)
Just wait until it get twice as hot this summer.
Asphalt is laid somewhere around 300F, so if it truly got twice as hot it would melt the road and everyone’s tires.
Used to be a paver and I can confirm that shit is HOT, only gets worse once you hit it with water. The steam will give you blisters as you work it
load more comments
(3 replies)
Op get data!
Neat, you can also see where people's tyres have absorbed some of the heat.
load more comments
(6 replies)
Hmm, that's interesting. Don't you guys generally use concrete for paving in the US? In building construction, you're supposed to give concrete like a month to fully harden, even though it already looks firm after a day or so.
For paving, they're likely using a hardening accelerator, so the timelines wouldn't be the same, but if building construction is anything to go by, it seems like you'd want to give it as much time as possible, not send cars on there while it's still hot. 🥴
Generally? I don't think so. I think concrete gets used in heavy intersections, super busy streets, and some parts of highways/freeways, but not for all the branching streets. Smaller/less used roads and residential are generally pavement/asphalt. Though some HOAs like to use concrete for the longer expected lifespan and then don't budget for repairs so it turns to crap after a while. That said, I'm not a professional, I just live here. Not in an HOA, thankfully, but near one with terrible concrete roads.
Even with accelerators it still needs a few days (usually about a week) to harden to 80% strength, and it will never be quite as strong as it would be without an accelerator.
I think that’s part of the reason we don’t use concrete pavement more often. It certainly lasts a lot longer, but laying it is way more time consuming. Asphalt is ready to go within a day, just needs to cool off.
Its uncommon to see concrete roads in the US but there are a few of them around. That being said it could be more common in some states than others.
load more comments
(3 replies)
Fluke camera?
Topdon. I had Flir before and like this much better. For one thing, they don't watermark my images.
load more comments
(1 replies)
Yeah wtf, that's bonkers.
Ambient temp seems to be roughly 75... maybe wait till it gets down to 95, 90?
view more: next ›