all 30 comments

sorted by: hot top controversial new old
[–] 13 points 19 hours ago

Claude, remind me to take a break every 9 minutes and 30 seconds.

See, antis? It's that simple and you couldn't come up with it.

/s

  • source
  • [–] 26 points 23 hours ago (1 child)

    That makes sense and seems obvious. I’ve worked in tech for over 20 years and have learned the most while banging my head against the keyboard trying to solve a problem. I wouldn’t have learned all I know now without that experience. I doubt that process is specific to tech. If AI can just give us the answers, what kind of long term impact does that produce? Ideally it frees us up for higher/order thinking but that seems like a pie-in-the-sky dream to me. I’m concerned but hope those concerns end up unwarranted.

  • source
  • hideshow 1 child comment
  • [–] 2 points 23 hours ago

    Yeah all those assembler optimisations I learned have proven so useful over the years!

    On a serious note though, if you like (and have the ability to understand) complexity then AI will just move the needle towards other things to learn, IMO.

    The AI tech itself is interesting, like back in the day people would get curious about how video games worked under the hood, while others "became stupid" because they only played them.

    I feel it's as long as human history, Don't read it will make you lazy and stupid!

    Smart people won't lose their "iq" (or whatever) for reading, playing videogames or using AI, couch potatoes won't get out of the couch if they stop reading, stop playing videogames or stop using AI...

    The algorithmic dark pattern though (tiktok, FB, ...), that's serious bad stuff wrecking havoc with your dopamine, fuck that.

    Rant off 😅

  • source
  • parent
  • [–] 25 points 23 hours ago

    No problem: I have a 9-minute timer to stop doing AI in time so I can stay hard.

  • source
  • [–] -2 points 23 hours ago (20 children)

    Using a drill instead of a screwdriver erodes your ability to do hard work.

  • source
  • hideshow 20 child comments
  • [–] 2 points 9 hours ago (4 children)

    Could you please explain in further detail why offloading cognitive labor is equivalent to reducing physical labor? Cognitive and physical labor are two different things: you need to struggle through a challenging problem to build structural thinking capacity for higher-order thinking; skipping fraction math isn't just saving physical energy but skips building the schemas needed for calculus, linear algebra, and so on. Using a drill over a screwdriver just saves your arm muscles, and it doesn't condition you to expect wood to screw itself together without your input.

  • source
  • parent
  • hideshow 4 child comments
  • [–] 1 point 9 hours ago (3 children)

    You still have to use the correct drill bits, so you have to know how to properly use a drill, but since those same tools are available as hand tools, its lazy to use a drill.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 1 point 8 hours ago (2 children)

    Imagine a world where a company invents an Automated Robotic Sculpting Arm.

    You don't need to hold a chisel or hammer anymore. You simply stand in front of a block of marble and speak to the robot using natural language: "Sculpt me a realistic human torso, slightly leaning forward, capturing a sense of tension."

    A novice steps up to the machine. They have never touched clay, never studied human anatomy, never felt the resistance of marble grain, and never made a mistake that chipped off an irreplaceable nose.

    The robot chisels out a figure in seconds.

    A veteran sculptor walks by and points out: "The muscle attachment at the collarbone is anatomically impossible, and the weight distribution makes the statue structurally unsound—it will tip over in a high wind."

    The novice replies: "No problem! I don't need to know anatomy or physics. I'll just refine my prompt!"

    So the novice turns to the robot and says: "Fix the collarbone so it looks anatomically correct, and adjust the weight distribution so it won't tip over."

  • source
  • parent
  • hideshow 2 child comments
  • [–] 2 points 8 hours ago

    The master sculptor will eventually die and that hard learned knowledge and finesse will be lost. The pointed details will be locked into a fixed context and become immutable and untransferable to other works which will eventually lead to only the same exact sculptures will be made. Sculpture ceases to be an expression on individual understanding of reality and becomes a standardized product.

    Writing that made my stomach churn. It is nightmare fuel.

  • source
  • parent
  • [–] 10 points 22 hours ago (11 children)

    That is not the issue here. It really is not.

  • source
  • parent
  • hideshow 11 child comments
  • [+] -7 points 21 hours ago (10 children)
  • [–] 6 points 21 hours ago (9 children)

    Would you use a drill to fit screws on sensible components or that required precise and careful fitting?

  • source
  • parent
  • hideshow 9 child comments
  • [–] -5 points 21 hours ago (8 children)

    Probably wouldn't want to use any old drill in that job. Would need a multi-million dollar specialized drill for that use case.

  • source
  • parent
  • hideshow 8 child comments
  • [–] 5 points 21 hours ago (7 children)

    Let's refine the question even more: would you put together a watch with a drill?

  • source
  • parent
  • hideshow 7 child comments
  • [–] -5 points 20 hours ago (6 children)

    Yes. CNC machines are fantastic drills for producing watches. Micro-drills are also used to create tiny accurately placed holes in movement plates, bridges, cases, etc. Why do you ask?

  • source
  • parent
  • hideshow 6 child comments
  • [–] 4 points 19 hours ago (5 children)

    Would you use a drill to assemble a watch?

    You are being unnecessarily coy with your replies. You stated that using a drill or a screwdriver have no inherent difference, I am trying to establish there is one using your own argument.

    The last reply was a shift in your original position. I am not talking about producing parts and components.

  • source
  • parent
  • hideshow 5 child comments
  • [–] -2 points 14 hours ago (4 children)

    Change the question all you want. What does hard work have to do with watches?

  • source
  • parent
  • hideshow 4 child comments
  • [–] 2 points 13 hours ago (3 children)

    I refined my question and replaced "put together" with "assemble" after your comment involving CNC and parts production. Felt as if I wasn't being clear enough in my words.

    Back to the watch analogy.

    Assembling a watch is a time consuming process, requiring patience and precision. It takes time to learn the process and failure, although not rewarding, is a crucial part of it.

    Using an LLM to do whatever it gets used for cuts off the building of the delayed reward process and lowers the threshold for people to endure frustration in order to achieve a result.

    A straight forward example: internet searching. A standard search result returns a series of possible pages where the answer for a given question may be. It may be the first link that supplies the information required, it may be the second, the tenth or a sum of the links, but it's up to the person doing the search to decide. And LLM returns a prechewed result that gives instant gratification but not long lasting learning.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 1 point 9 hours ago (2 children)

    Yeah, anyone can use it wrong. Im not arguing that. Thats why you don't use just any drill for watch making.

  • source
  • parent
  • hideshow 2 child comments
  • [–] -5 points 23 hours ago (4 children)

    I wonder if search engines did the same thing.

  • source
  • hideshow 4 child comments
  • [–] 9 points 22 hours ago

    No. Using a search engine justs presents a list of possible locations for an answer. There us still the need to check and access if one or the other is a possible solution and choose which is the better one. There is an involved process. The LLMs spit out a prescribed solution, with an enforced by marketing and ignorance presupposition it is correct.

  • source
  • parent