you are viewing a single comment's thread
view the rest of the comments
[–] 15 points 1 week ago (8 children)

Same advice as disassembling a very old CRT TV - leave it unplugged for 24 hours for all the capacitors to discharge if you're wanting to reuse the bits for any projects that you're doing. Otherwise, spicy voltages may still be present.

  • source
  • parent
  • hideshow 8 child comments
  • [–] 9 points 1 week ago (1 child)

    Just one minor quibble, leaving a old TV unplugged for 24 hours does not make it safe. Capacitors can hold a deadly charge for days, months, or even years.

  • source
  • parent
  • hideshow 1 child comment
  • [–] 7 points 1 week ago (4 children)

    You don't have dedicated high voltage discharge device, a screw driver taped to a big not conductive stick?

  • source
  • parent
  • hideshow 4 child comments
  • [–] 11 points 1 week ago (3 children)

    You'll give me traumatic flashbacks to our electricians checking the industrial overload settings by dropping a spanner onto the busbars. If the switchgear tripped out before the spanner melted, then the settings must be correct.

  • source
  • parent
  • hideshow 3 child comments